Arriana Vasquez is an associate staff writer covering working-from-home equipment at Wirecutter.
If Zen masters were to comment on the ideal position to take at your desk, they might say: “If you start to sit too long, stand. If you start to stand too long, sit.”
If you’re looking for a quick, easy way to stand up occasionally while working at your desk, we recommend the compact, stable, and easily adjustable FlexiSpot AlcoveRiser Standing Desk Converter M7. It requires manual adjustment, but of all the converters we tested, it’s one of the easiest to move up and down, and it still accommodates a full work setup.
If you prefer to press a button and have the desk move on its own, it will cost a lot more, but the model we’d get is the Uplift E7 Electric Standing Desk Converter. And if you’re looking for something you can put away when you’re done working, we like the Branch Desk Riser.
Customization
You should be able to set the riser to a height that meets your ergonomic needs, not be locked into predetermined settings.
Ease of use
We disqualified risers that moved too easily or were difficult to adjust.
Low minimum height
If the riser is too thick, when lowered all the way down it can be uncomfortable to use while seated.
Enough space
The converter should provide enough room to let you use a monitor, keyboard, and mouse, if you want to.
Top pick
This standing desk converter is a sturdy, compact riser that’s easy to use and comes in several sizes and finishes to suit a variety of office setups.
The FlexiSpot AlcoveRiser Standing Desk Converter M7 stood out in our testing for its smooth, easy manual operation and impressive 37-pound weight capacity. Its front-facing handles are especially user-friendly, even for shorter users, and the riser adjusts more easily than most other models.
This converter is stable and lightweight, and it’s available in multiple sizes and finishes at Amazon. Its spacious keyboard tray accommodates a full-size setup, as well.
Best for...
Much heavier and more space-filling than manual converters, this electric riser has memory buttons, ample workspace, and an optional lower keyboard tray. But it costs almost as much as a full-size electric standing desk.
Uplift’s E7 Electric Standing Desk Converter gives you the most convenient standing setup short of a full standing desk. It weighs 92 pounds and takes up more than 36 inches of desk depth with its overhanging keyboard tray, but it’s quicker and quieter than other electric converters we tested. It’s expensive, though, costing $20 more than our top standing desk pick from Uplift at this writing.
The E7’s wood grain desktop options (bamboo or rubberwood) look great, and it also comes in smooth white and black finishes (at a slight upcharge) if you prefer. This converter also lets you lower the keyboard tray for a better ergonomic setup while sitting.
Best for...
The best-looking of our picks, this converter is lighter and more portable than the others, and it locks when in its lowest position. That makes it easy to move around or put away when not in use.
The Branch Desk Riser is a stylish, flat-top riser that’s portable. When lowered all the way down, it stands just 2.5 inches above a desk surface (that’s half the height of the second tier of the Flexispot) and when you’re ready to put it away, locks in place for easy storage. We think it’s ideal for occasional use or shared spaces.
While it has a lower weight capacity than our top pick and is more expensive, its durable finish (available in several colors) and premium construction make it feel worth the expense.
I’m a writer at Wirecutter covering work-from-home equipment. In addition to this guide, I’ve written about home-office and hobby products including webcams, ring lights, and vlogging gear.
For this guide:
Since 2013, we’ve reviewed and tested more than 25 standing desk converters, employing the help of several testing panels including people with dexterity and vision impairments, as well as a wide range of ages and body types.
Writers Kevin Purdy and Melanie Pinola wrote previous versions of this guide. Some of their reporting and writing are still present in this version.
Like all Wirecutter journalists, I review and test products with complete editorial independence. I’m never made aware of any business implications of my editorial recommendations. Read more about our editorial standards.
In accordance with Wirecutter standards, I return or donate all products I’ve tested once my assessment of them is complete, which may involve longer-term testing by my colleagues and me. I never hang on to “freebies” once testing is done.
Standing desk converters, also known as desk risers or toppers, are for people who don’t want to buy a full-size standing desk but still want to alternate between sitting and standing while working at a computer. This could be for any of the following reasons:
You have a fixed-height desk that you like.
You work in a shared or multipurpose space and need to put away your workspace after your work is done (such as at a dining room table).
Your employer will not allow you to install a full-size standing desk but will allow a converter.
You can’t fit a full-size sit-stand desk in the area available to you.
Ergonomic experts recommend alternating between sitting and standing during your workday because sitting for prolonged periods of time could be detrimental to your health. Research has associated too much sitting with a higher risk of heart disease and diabetes, certain cancers, and premature death.
But that doesn’t mean you should stand all day, either. “Repeated, long-term exposure to standing also has been implicated in the development of serious health problems,” said April Chambers, associate professor in the Department of Health and Human Development at the University of Pittsburgh. So fixed-height standing desks aren’t ideal either if you’re using them for hours on end.
A standing desk converter lets you quickly raise or lower the desktop to alternate between sitting and standing throughout your workday. Researchers recommend sitting and standing for equal periods of time each day, or, at the highest ratio, sitting for 15 minutes and standing for 45 minutes every hour.
Generally speaking, there are two kinds of desk converters: flat and two-tier. Flat risers are similar to working at a traditional desk, while two-tier risers are more like working at a desk with a monitor shelf. The second tier is meant to elevate the monitor or laptop screen while keeping the keyboard and tray low enough to still be ergonomically correct.
In their lowest positions, two-tier standing desk converters raise a keyboard’s height from 0.5 to 1.5 inches above the desktop, while flat-top risers will lift the keyboard height by 2.5 inches or more. That, coupled with the height of the average desk (28 to 30 inches), might mean that people who are under 5-foot-11 will need to use a footrest for proper ergonomics while sitting.
When raised to their tallest positions, standing desk converters typically elevate a keyboard about 14 or 15 inches above a desk’s surface; coupled with the height of an average desk, this means they best accommodate people who are about 6-foot-2 or shorter. Those taller than that will be better off with a fully adjustable desk.
In some cases, the surface of the riser extends beyond the feet, and it’s possible for things, like a mug for example, to end up in harm's way. It’s important to check the area around or beneath the desk before lowering it. Otherwise, it’s possible for the handle or even the surface area of the riser to get caught on or knock over anything in the way.
Years of using standing desk converters, full-size standing desks, and even some cardboard standing adapters have taught us a lot about what to look for in a sit-stand setup. These are the attributes we value:
Adjustability: You should be able to lock your work surface at just the right height instead of settling for a small number of preset heights.
Ease of raising and lowering: For manually controlled models, we consider how much strength or finesse is required. (In our latest round of testing, one of our panelists was a 5-foot-2, 130-pound writer who doesn’t do a lot of strength training.) For electric models, we consider how long a desk takes to move and how difficult it is to make fine adjustments.
Low likelihood of pinching or crushing: The moving parts shouldn’t catch your hands or snag any cables. Electric converters should offer collision detection.
General ergonomics: The converter should allow you to stand about an arm’s length away from your screen, elbows bent at a 90-degree or greater angle.
Space and layout: Any standing desk option should have optimal space for a keyboard and mouse, as well as a few other items such as a mug, a medium-size notebook, and a pen. We prefer flat, rectangular surfaces over those with space-wasting cutouts.
Maximum height: A converter should accommodate as many heights as possible. Most full-size desks we’ve recommended accommodate people up to about 6-foot-2.
Minimum height: A thick converter work surface may raise your typing surface more than 2 inches off the desk you are using. That could mean some people may not be able to raise their chair to meet that height while still keeping their feet flat on the floor.
Desk depth: We look for converters that can fit a typical 30-inch-deep desk
Noise: This factor is mostly a consideration for electric models, but some manual converters also make groans or unsettling noises like screeching metal-coil-bending sounds when moving.
Weight: For flat, single-tier models, this is an important factor that allows you to easily remove your converter if you need the surface for other things. We looked for models that weigh between 10 and 30 pounds. Less than 10 pounds feels too flimsy; above 30 pounds is too cumbersome to move regularly.
Looks: We take note if a converter does anything to distinguish its appearance or hide some of its raising mechanisms.
With the above priorities in mind, we tested the converters side by side on identical desks. We outfitted each with a 24-inch monitor, a laptop, an external keyboard, and a mouse.
We also brought in a panel of paid testers of various heights, strengths, and some with physical dexterity issues, and collected feedback from them on how easy or hard each riser was to adjust.
To test the weight capacity, we pushed the limits of what each model claimed by placing one to two 10-pound sandbags on it and adjusted the desk’s height. We looked to see how well they tolerated the weight, noting whether the extra weight made it harder to lift or caused the surface to drop down more quickly.
Top pick
This standing desk converter is a sturdy, compact riser that’s easy to use and comes in several sizes and finishes to suit a variety of office setups.
Of all the standing desk converters we tried, the FlexiSpot AlcoveRiser Standing Desk Converter M7 was the top choice among testers, for its versatility and ease of use.
This manual, two-level converter can work with monitors on a stand, an arm, or an all-in-one computer. It also has one of the highest weight capacities of all the risers we tested at 37 pounds, but it was still one of the easiest to raise and lower.
It makes adjustments quick and easy. Switching from sitting to standing with the AlcoveRiser M7 takes only a second or two longer than standing up, and in our tests it was about 10 seconds faster than even the quickest electric models we tried.
We found that the farther a converter’s handles were from the user, the harder they were to operate. This was especially true for shorter testers, since this caused the user to lean forward more.
This is one area where the AlcoveRiser M7 stood out: Unlike most other models we tested, which positioned their handles farther away from the user (closer to the middle of the surface area), the handles on the AlcoveRiser are at the front. Even the shortest testers had no issues reaching for or grabbing them.
It’s strong yet light. Capable of handling 37 pounds of equipment (more than enough for a typical laptop, 27-inch monitor, keyboard, and mouse), it has one of the highest weight capacities of all the risers we tested in 2025. The riser itself weighs just under 24 pounds, making it one of the lightest models we considered.
Its rising motion is very smooth. Once raised, the AlcoveRiser M7 is easier to push back down than other models we tried. Even with a 20-pound sandbag on the top tier, I could raise and lower it with one hand (though two hands are suggested).
Other models we tested, like the Uplift Lady Bird, were so difficult to lower — even when loaded with equipment — that some of the smaller-framed testers couldn’t do it at all. This riser didn’t give any of our paid testers trouble, even those with disabilities that affect their hand strength or dexterity.
It’s available in plenty of size options. It comes in 28-, 32-, 35-, 40-, and 42-inch widths.
In our tests, the 28-inch model was large enough to comfortably accommodate a 34-inch monitor on a monitor arm, plus a laptop off to the side or on the keyboard tray. The larger sizes can easily fit a laptop with or without a laptop stand, a monitor on a stand, two monitors on two stands, or one or two monitors on a monitor arm.
It has a roomy keyboard tray. Nearly all of our testers praised the tray on the AlcoveRiser M7 for being open and roomy. The keyboard tray on our 28-inch-wide model had enough space to accommodate a laptop or a full-size keyboard and mouse with room to spare.
You’re covered for years of use. The FlexiSpot AlcoveRiser M7 comes with a five-year warranty for the frame and desktop, plus a three-year warranty for the spring system and other mechanisms.
Its elevated keyboard tray takes some getting used to. The keyboard tray raises your typing surface about 1.5 inches off your table or desk when you’re sitting, so you may need to raise your chair or make other adjustments to your workspace.
It’s not the most attractive piece of furniture. It’s good that the AlcoveRiser M7 is available in several sizes, but even the smallest size is big and boxy.
Cable management is key. Like most of its peers, the FlexiSpot AlcoveRiser requires that you manage your cords so they can’t be caught in the pinching parts of the frame.
Best for...
Much heavier and more space-filling than manual converters, this electric riser has memory buttons, ample workspace, and an optional lower keyboard tray. But it costs almost as much as a full-size electric standing desk.
Uplift’s E7 Electric Standing Desk Converter is the closest you can get to the experience of using a full-size standing desk while retaining a more compact form factor, thanks to its motorized column that can raise a sleek-looking bamboo work surface and a VESA-mounted monitor with the press of a button.
It’s quiet and easy to organize. The E7’s electric movement makes very little noise, and it has more cord-routing options and suggestions than other electric converters we’ve tested.
You can program your preferred heights. Programming your sitting and standing heights into the E7’s memory is convenient, and unlike the other electric models we’ve tested, it has smartly placed and easy-to-operate buttons.
It’s pretty stable. The main work surface and monitor mount are firm when you’re typing at both sitting and standing heights. The keyboard tray does wobble a little, especially if you’re using a mouse near the left or right edge.
It can lift the average second grader. The E7’s weight capacity is 110 pounds, double the next-closest rival we tested. That figure includes its desktop and keyboard tray, meaning you have about 80 pounds of headroom to play with. Just note that the maximum weight for the VESA mount is 17.6 pounds, which may rule out some larger monitors.
It takes up a lot of room. You need at least 26 inches of desk depth (plus roughly another 9 inches with the keyboard tray), and it weighs 92 pounds, so it’s not easy to move between different work surfaces. This is a riser that’s best left permanently stationed on one large desk.
Sitting at the E7 could be slightly awkward, depending on your height. The main work surface rests about an inch above your fixed-height desk, slightly lower than our top pick. If you add on the optional (but included) adjustable keyboard tray, that piece sits lower than your work surface. That could work for some people — especially those 5-foot-5 and shorter, who might otherwise struggle to sit tall enough with the E7 on their desk.
Adjusting the height of the monitor stand can be annoying. The biggest flaw of the E7 is that you have to mount your VESA-compatible monitor at one of five spots on the column. Moving the monitor to a different height involves inserting a screwdriver behind the monitor.
This limitation means you need to choose a monitor height that is comfortable for both your sitting and standing positions
It’s expensive. The E7 costs $620 at time of writing, which is actually $20 more than the cheapest configuration of our top pick among standing desks.
Best for...
The best-looking of our picks, this converter is lighter and more portable than the others, and it locks when in its lowest position. That makes it easy to move around or put away when not in use.
If you need a good-looking riser or one that can be hidden away when not in use, the Branch Desk Riser is a great option. Unlike our other picks, this one is meant to be pulled out when needed and tucked away again when you’re done.
This is ideal for someone who works from home less frequently or wants to occasionally convert a shared or multi-use space like a kitchen table into a sit-stand workstation.
You can put it away when you don’t need it. Unlike the FlexiSpot AlcoveRiser M7 or the Uplift E7, both of which are meant to be set-it-and-forget-it workspace solutions, the Branch Desk Riser is a flat-topped riser that folds down to just 2.5 inches and locks in place.
Once it’s locked, you can pick it up and move it, or you can stow it away near your desk until you need it again. Other single-level risers we tested didn’t lock when lowered, and trying to relocate them caused the base to extend, making it hard to move.
Just be sure you don’t accidentally grab it by the handles, or it’ll pop open on you, as it did with us a few times.
It’s easy to adjust the height. Like our top pick, the Branch riser has its height-adjustment handle closer to the front, so it’s not too difficult to use (especially for shorter people). Making small adjustments to the height wasn’t difficult for a 6-foot-1 male tester, but it required pushing with some body weight for a 5-foot-2 female tester.
It looks nice. You can order the Branch riser in several finishes. The pale “wood grain” topper we used in testing has a premium look and feel, but you can also get it in white, walnut, or carbon.
It’s not as sturdy as our top pick. The Branch’s weight capacity is 26 pounds — about 10 pounds less than our top pick — so it can’t accommodate multiple monitors as readily.
It’s heavy and expensive. While it feels nice, the wood top adds some heft to the riser — and makes it pricier than competitors mostly made of plastic. While it is intended as a stowable alternative, the Branch weighs 22 pounds, which is heavier than similar models made with plastic work surfaces. Its beveled front edge was also aesthetically divisive among our testers.
It does cost twice as much as our top pick: usually around $250. But it also has a far more premium feel than the other flat-top models we tested, which are made with plastic and thinner aluminum frames. We can’t guarantee the Branch will last longer than the competition, but it sure felt like it would. If anything does go wrong, Branch offers a three-year warranty.
If you want a smaller electric riser with programmable settings: Consider the VariDesk Premier Electric Single-Monitor. It’s primarily designed to be used with a monitor on the monitor mount and your laptop sitting on the lower tray area, where it serves as the keyboard and mouse. But we found that you can use a separate keyboard and mouse if you plan to close your laptop and stow it on the second tier. It rises faster than most of the other models we tested, provides a decent amount of space without feeling too big, and has programmable settings.
However, the control panel is positioned farther away than on our picks, tucked under the monitor. That means if you have your laptop sitting open on the keyboard tray, you’ll have to reach past it to adjust the settings.
And unlike with the Uplift, the monitor mount doesn’t provide multiple height options, so if you’re above or below average height, it might not work for you.
If you want an electric version of our top pick and don’t need programmable settings: Check out the VariDesk Pro Plus 36 Electric. It’s similar in appearance to the FlexiSpot AlcoveRiser M7, but its support legs are a little wider, and it has a higher weight capacity. It doesn’t have our electric pick’s programmable controls, though — just up and down buttons. It also moves slower than most of the other models we tested and is several times more expensive than the FlexiSpot.
If you need a small riser for just a laptop: The Vivo V011F is half to a third the price of our picks. It takes up almost no space and is the lightest and most portable riser we tested. However, it’s not infinitely adjustable, so you’re forced to select from among the eight height options. And because it’s so small, it can’t really handle a ton of weight. (The manufacturer lists its capacity at 11 pounds, which means it can readily handle a MacBook Pro and a portable monitor.)
We’re looking forward to testing new standing desk converters: a motorized version of our top pick, a desk-clamping model, and one with a programmable keypad like those on full-size standing desks.
The VertDesk Converter V1CB/V1CW was a previous pick, but after a new round of testing, we found it more challenging to adjust than the FlexiSpot AlcoveRiser M7. It also takes up more space, since it rises up and toward the user rather than straight up. It’s several times more expensive than the AlcoveRiser, too.
The Mount-It! X-Lift Standing Desk Converter was extremely difficult to adjust, especially when raised all the way. Several of our paid testers could not lower it, even when loading it with nearly their full body weight. Some testers with dexterity issues also said the handles were hard to reach or grab.
The Humanscale Quickstand Eco Desk is a sleek-looking riser that splits the difference between manual and electric rising action. Rather than a motor or gas springs, it uses a counterweight balance system. Unfortunately, when we adjusted the height settings to suit our needs, we found the desktop moved too easily. With some testers, the weight of their arms was enough to cause the workstation to float down gradually. All of our testers agreed that the Humanscale was one of the best-looking risers they tested but wished there was a way to lock the workstation at a set height.
The Uplift Lady Bird is similar to our top pick in that it’s a manual two-tier riser. While the Lady Bird has a longer warranty (15 years instead of five), it has a smaller range of heights and size options, and weighs and costs more. Several testers found it hard to adjust because the handles were too far away, and one tester remarked that the keyboard tray hit her stomach as she raised it up. Finally, all of our testers felt the keyboard tray was cramped.
The VariDesk Pro Plus 30 (also available in 36-inch and 48-inch versions) takes up just under 30 inches of depth — the most of any converter we’ve tested. In our tests, it was stable while we worked at standing height, and we found its keyboard tray to be about as bounce-resistant at sitting height as that of the VertDesk. But the Pro Plus 30 has 11 locked-height positions, and its upward momentum is very strong, so we sometimes had to fight to prevent it from skipping the spot we wanted.
The Ergotron WorkFit-TX Standing Desk Converter is different from most two-tier converters, with a keyboard tray that extends below your table and toggles between tilted and flat, as well as dedicated cable-routing grommets near the back. It’s also very big — 36.6 inches wide and up to 33 inches deep, not including the tray. The WorkFit-TX is a stable converter with a lot of room for your gear, and it can handle big monitors. But in our tests, pressing it down from standing height felt like doing a triceps exercise at the gym. It’s a manual riser but more expensive than our electric riser pick.
This article was edited by Ben Keough and Erica Ogg.
An earlier version of this article was written by Melanie Pinola, a Wirecutter senior staff writer who died in October 2024.
The LapGear Designer Lap Desk is comfortable to use and roomy enough to fit a 17-inch laptop. Plus, it has extra storage for a phone and other supplies.
To sit comfortably at a desk for long stints, many people need some help. Most fixed-height desks range from 28 to 30 inches tall, which is ideal if you’re between 5-foot-9 and 6 feet tall. But most people aren’t that tall and can’t sit at their desk comfortably for long stints of time. If you can’t keep your feet firmly flat on the floor at your desk while also typing comfortably with your arms parallel to the floor, you need a footrest.
Great office chairs aren’t cheap, and not everyone can afford ergonomic perfection. But a few tweaks can make a $50 chair feel nearly as good as a $1,000 one.
If you’re unsatisfied with the camera that’s built into your computer — or if it doesn’t have one — the Logitech Brio 505 is your best option for sharp Zoom calls.
SKIP ADVERTISEMENT